
01 — Product line
Cast Polyurethane (CPU)
TDI and MDI prepolymers plus A-B casting systems, 60 Shore A to 65 Shore D.





Typical applications
Series and grade families
Five backbones cover the range. The backbone sets oil resistance, hydrolysis resistance, rebound and heat build-up before any hardness figure is fixed.
| Series | Key features | Typical grades | Applications |
|---|---|---|---|
01 · VT-PES Polyester-TDI series Original SP polyester series: general grade, H-modified series and polycaprolactone solvent-resistant grades. | High oil and solvent resistance, high tensile and tear strength for heavy-duty work; can be pigmented for colour. | VT-13XX, VT-23XX, VT-H13XX, VT-25XX (solvent-resistant polycaprolactone). | Rubber rollers, sticks, wheels, sealing rings, sieve plates, moulds, shaft sleeves, scrapers and solvent-resistant printing rollers. |
02 · VT-ETP PPG polyether-TDI series Conventional grades and low-toxicity eco variants. | Hydrolysis and mildew resistance, low viscosity for good flow, moderate mechanical performance and long service life in humid conditions. | VT-11XX, VT-21XX, VT-21XX-A eco series. | Caster wheels, universal wheels, sieve plates, sheets and bars, and polyurethane parts for wet-condition service. |
03 · VT-PTM PTMEG polyether-TDI performance series PTMEG backbone for repeated impact and dynamic load. | High rebound, low heat build-up, hydrolysis resistance and low-temperature performance; holds up under repeated impact loading. | VT-12XX. | High-rebound wheel components, cyclone liners, seals and wear parts under cyclic dynamic load. |
04 · VT-MDI MOCA-free MDI multi-component systems A/B/C/D kits: VT-33XX (MDI-polyester) and VT-32XX (MDI-PTMEG polyether). | MOCA-free; hardness adjustable from 60A to 95A by component ratio; balanced wear and rebound; fast demoulding. | VT-33XX (MDI-polyester), VT-32XX (MDI-PTMEG polyether). | Polyurethane sheets, heavy-load wheels and industrial elastomer parts where a MOCA-free system is required. |
05 · VT-2K Two-component room-temperature systems General casting, mouse-pad formula, mould-making adhesive, spray grade and multi-component wheel and pulley kits. | No high-temperature vulcanisation; room-temperature cure; short demould cycle; some grades sprayable; wide hardness range with transparent and translucent options. | VT-AXX / VT-BXX two-component, VT-PT spray series, VT-PW A/B/C wheel kits. | Electrical potting, mouse-pad material, mould reproduction adhesive, small parts, spray-applied wear coatings, skate and roller-skate wheels. |
